Pontiac 2005 GTO Uživatelský manuál stáhnout pdf (Strana 235)

100

101

3. Remove the wiring harness connector by squeezing

the two tabs on the connector and pulling the

connector down.

4. Remove the old bulb

by twisting the bulb

counterclockwise.

5. Install the new bulb without touching it.

6. Reverse the steps to reinstall the headlamp

assembly.

Front Turn Signal and

Parking Lamps

To replace a front turn signal or parking lamp bulb,

do the following:

1. Open the hood. See Hood Release on page 5-11

for more information.

2. Follow the removal procedure for either the driver’s

side or passenger’s side of the vehicle to access

the bulbs. See Headlamps on page 5-47 for

more information.

3. Disconnect the wiring harness connector from the

bulb assembly.

4. Turn the bulb socket counterclockwise and remove.

5. Lightly press the bulb and twist counterclockwise

out of the socket.

6. Insert the new bulb and install the bulb socket.

The bulb should be colored orange.

7. Reconnect the wiring harness connector.

8. Reinstall the battery or radiator cover. See

Headlamps on page 5-47 for more information.

5-49

1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 317 318

Komentáře k této Příručce

Žádné komentáře

Pontiac 2005 GTO Uživatelský manuál Strana 235

Komentáře k této Příručce

Související produkty a manuály pro Auta Pontiac 2005 GTO