Pontiac 2005 GTO Uživatelský manuál stáhnout pdf (Strana 102)

Turn and Lane-Change Signals

To signal a turn, move the lever all the way up to signal

right turn and all the way down to signal a left turn.

When the turn is ﬁnished, the lever will return

automatically.

An arrow on the instrument

panel cluster will ﬂash in

the direction of the

turn or lane change.

To signal a lane change, just raise or lower the lever

until the arrow starts to ﬂash. Hold it there until you

complete your lane change. The lever will return by itself

when you release it.

As you signal a turn or a lane change, if the arrows

ﬂash rapidly, a signal bulb may be burned out and other

drivers won’t see your turn signal.

If a bulb is burned out, replace it to help avoid an

accident. If the arrows don’t go on at all when you signal

a turn, check for burned-out bulbs and then check the

fuse. See Fuses and Circuit Breakers on page 5-86.

Headlamp High/Low-Beam Changer

To change the headlamps from low beam to high

beam with the headlamps on, push the turn

signal/multifunction lever away from you. The headlamps

will change from low beam to high beam.

When the high beams are

on, a light on the

instrument panel cluster

also will be on if the

ignition is on.

If the fog lamps are on when the high-beam headlamps

are activated, the fog lamps will turn off. The fog

lamp indicator in the instrument panel cluster will

turn off.

3-8

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 317 318

Žádné komentáře

Pontiac 2005 GTO Uživatelský manuál Strana 102